The elan driver converts frames into a different format. These frames
are only needed to assemable the image and should be free'ed afterwards.
Fixes: #213
During calibration, the internal state was stored as INACTIVE. This is
not true though, the device is actively running state machines.
Move the state update to the start of the operation, therefore ensuring
we don't deactivate without completing the SSM.
Note that this will prevent a crash, but the driver still does not
behave quite correctly when such a state change does happen. However,
this is just a safety measure as the state change should not happen in
the first place.
See: #203
Add a GCancellable parameter to fpi_ssm_nex_state_delayed and
fpi_ssm_jump_to_state_delayed() so that it's possible to cancel an action
from the caller and in case the driver wants to cancel a delayed operation
when a device action has been cancelled.
Since GSource data can be automatically cleaned up on source destruction, we
can mimic this for the devices timeout easily as well.
Add an extra parameter, and let's use this cocci file to adapt all the
drivers like magic:
@@
expression e1, e2, e3, e4;
@@
fpi_device_add_timeout (e1, e2, e3, e4
+ , NULL
)
When a transfer is completed, we automatically unref it since we can't
consider it valid anymore since this point.
Update the drivers not to free the transfer after submitting anymore.
When a machine is completed, we automatically free it since we can't
consider it valid anymore since this point.
Update the drivers not to free the SSM on completion callback anymore.
Use the same approach of GTask, making possible to set the data from a
function. Givent the fact that a SSM has now a device parameter, it's
generally not needed to pass an extra data value.
In such case make it possible to set it and to define a destroy-notify
function to handle its destruction when freeing the SSM.
This changes the cancellation logic a bit to ensure we always deactivate
the device (equivalent to the AWAIT_OFF state in the driver). All
commands except for the deactivation command should be cancelled when an
operation is stopped, this is to ensure that the LED is turned off at
the end of an operation.
The state was always AWAIT_FINGER and it was never used by any driver
(except for error checking). So remove it, in particular as a correct
state change will be done after activation anyway.
The only driver with code that actually did anything based on this was
the URU4000 driver. However, all it did was an explicit state change
execution. This is not necessary, as the state_change handler is called
anyway (i.e. we now only write the AWAIT_FINGER register once rather
than twice).
Manual changes plus:
@ init @
identifier driver_name;
identifier activate_func;
@@
struct fp_img_driver driver_name = {
...,
.activate = activate_func,
...,
};
@ remove_arg @
identifier dev;
identifier state;
identifier init.activate_func;
@@
activate_func (
struct fp_img_dev *dev
- , enum fp_imgdev_state state
)
{
<...
- if (state != IMGDEV_STATE_AWAIT_FINGER_ON) { ... }
...>
}
Check for the mean calibration being outside of range to know whether we
require a recalibration. Continue with the usual checks if the
calibration value is within range.
The dimensions some sensors return is the maximum zero-based index
rather than the number of pixels. Assuming every sensor has an
even number of pixels is safe.
libfprint/drivers/elan.c:351:4: warning: 2nd function call argument is an uninitialized value
dbg_buf(elandev->last_read, transfer->actual_length);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
libfprint/drivers/elan.c:46:5: note: expanded from macro 'dbg_buf'
fp_dbg("%02x", buf[0]); \
^~~~~~~~~~~~~~~~~~~~~~
../../../../../../Projects/jhbuild/libfprint/libfprint/fpi-log.h:52:16: note: expanded from macro 'fp_dbg'
#define fp_dbg g_debug
^
libfprint/drivers/elan.c:351:4: warning: The left operand of '<<' is a garbage value
dbg_buf(elandev->last_read, transfer->actual_length);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
libfprint/drivers/elan.c:48:27: note: expanded from macro 'dbg_buf'
fp_dbg("%04x", buf[0] << 8 | buf[1]); \
~~~~~~ ^
libfprint/drivers/elan.c:351:4: warning: The left operand of '<<' is a garbage value
dbg_buf(elandev->last_read, transfer->actual_length);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
libfprint/drivers/elan.c:50:41: note: expanded from macro 'dbg_buf'
fp_dbg("%04x... (%d bytes)", buf[0] << 8 | buf[1], len)
~~~~~~ ^
libfprint/drivers/elan.c:351:12: warning: format specifies type 'unsigned short' but the argument has type 'unsigned char' [-Wformat]
dbg_buf(elandev->last_read, transfer->actual_length);
~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
libfprint/drivers/elan.c:46:21: note: expanded from macro 'dbg_buf'
fp_dbg("%02hx", buf[0]); \
~~~~~~~~~~~~~~~~^~~~~~~
include/glib-2.0/glib/gmessages.h:345:32: note: expanded from macro 'g_debug'
__VA_ARGS__)
^~~~~~~~~~~
libfprint/drivers/elan.c:351:12: warning: format specifies type 'unsigned short' but the argument has type 'int' [-Wformat]
dbg_buf(elandev->last_read, transfer->actual_length);
~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
libfprint/drivers/elan.c:48:21: note: expanded from macro 'dbg_buf'
fp_dbg("%04hx", buf[0] << 8 | buf[1]); \
~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
include/glib-2.0/glib/gmessages.h:345:32: note: expanded from macro 'g_debug'
__VA_ARGS__)
^~~~~~~~~~~
libfprint/drivers/elan.c:351:12: warning: format specifies type 'unsigned short' but the argument has type 'int' [-Wformat]
dbg_buf(elandev->last_read, transfer->actual_length);
~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
libfprint/drivers/elan.c:50:35: note: expanded from macro 'dbg_buf'
fp_dbg("%04hx... (%d bytes)", buf[0] << 8 | buf[1], len)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
include/glib-2.0/glib/gmessages.h:345:32: note: expanded from macro 'g_debug'
__VA_ARGS__)
^~~~~~~~~~~
libfprint/drivers/elan.c:413:10: warning: format specifies type 'unsigned short' but the argument has type 'unsigned char' [-Wformat]
dbg_buf(cmd->cmd, 2);
~~~~~~~~^~~~~~~~~~~~
libfprint/drivers/elan.c:46:21: note: expanded from macro 'dbg_buf'
fp_dbg("%02hx", buf[0]); \
~~~~~~~~~~~~~~~~^~~~~~~
include/glib-2.0/glib/gmessages.h:345:32: note: expanded from macro 'g_debug'
__VA_ARGS__)
^~~~~~~~~~~
libfprint/drivers/elan.c:413:10: warning: format specifies type 'unsigned short' but the argument has type 'int' [-Wformat]
dbg_buf(cmd->cmd, 2);
~~~~~~~~^~~~~~~~~~~~
libfprint/drivers/elan.c:48:21: note: expanded from macro 'dbg_buf'
fp_dbg("%04hx", buf[0] << 8 | buf[1]); \
~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
include/glib-2.0/glib/gmessages.h:345:32: note: expanded from macro 'g_debug'
__VA_ARGS__)
^~~~~~~~~~~
libfprint/drivers/elan.c:413:10: warning: format specifies type 'unsigned short' but the argument has type 'int' [-Wformat]
dbg_buf(cmd->cmd, 2);
~~~~~~~~^~~~~~~~~~~~
libfprint/drivers/elan.c:50:35: note: expanded from macro 'dbg_buf'
fp_dbg("%04hx... (%d bytes)", buf[0] << 8 | buf[1], len)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
include/glib-2.0/glib/gmessages.h:345:32: note: expanded from macro 'g_debug'
__VA_ARGS__)
^~~~~~~~~~~
Pass the struct fp_dev and user_data to fpi_ssm callbacks, so that we
might be able to get rid of the fpi_ssm_get_user_data(), and
fpi_ssm_get_dev() as most drivers just get those from the ssm anyway
in their callbacks.
There has been a report that a 0x0c03 was installed straight (other
readers so far have produced images that are 90 degrees rotated). There
is no way for the dirver to know how a device is installed, so for now just
make an exception.
Sensor reset code has been removed because it is not needed during normal
operation.
Calibration and frame processing logic has been improved according to
recommendations from Elantech.
Make each command a separate struct to get finer control over which
commands are called on which devices. Update ssm's accordingly. Add
sensor_reset and fuse_load commands.
Support 0x0903, 0x0c03, 0x0c16, 0x0c1a, 0x0c26
