depau/libfprint
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
444 commits 27 branches 23 tags 11 MiB
Commit graph

444 commits

This branch
This branch
All branches
Author SHA1 Message Date
Bastien Nocera
703d9b2a07 img: Remove remove_perimeter_pts setting 
It's gone in NBIS 5.0.0, and will need to be replaced after the update.
 2018-08-24 16:11:07 +02:00
Bastien Nocera
a96509f286 Merge branch 'iafilatov/libfprint-elan-prepare-merge' into 'master' 
elan: Send stop cmd and recalibrate after each capture

See merge request libfprint/libfprint!11
 2018-08-10 12:36:01 +00:00
Igor Filatov
8553f2e41c elan: Send stop cmd and recalibrate after each capture 
This seems to fix the lock-up issue with 0903
 2018-08-10 14:21:36 +02:00
Bastien Nocera
56c96dde8b Merge branch 'wip/hadess/elan-update' into 'master' 
Update Elan driver

See merge request libfprint/libfprint!10
 2018-08-10 12:06:35 +00:00
Bastien Nocera
9793d60c5a elan: Remove unused string.h include 2018-08-10 13:45:29 +02:00
Igor Filatov
4ff97e7cbd elan: Increase bz3 threshold to 24 
Based on experience. Values more than 24 seem to work just after
enrollment, but it becomes very hard to verify in a day or so.
 2018-08-10 13:45:29 +02:00
Igor Filatov
75fe328f64 elan: Don't rotate frames on 0x0c03 
There has been a report that a 0x0c03 was installed straight (other
readers so far have produced images that are 90 degrees rotated). There
is no way for the dirver to know how a device is installed, so for now just
make an exception.
 2018-08-10 13:45:29 +02:00
Igor Filatov
b28b006d61 elan: Use IMGDEV_STATE_* events instead of pre-set capture path 2018-08-10 13:45:29 +02:00
Igor Filatov
c3b1c982bc elan: Set max frame height to 50, add note about performance 
Frame height is a loosely experience-backed guesstimation. 50 seems to be
a good middle ground between swipe speed and quality.
 2018-08-10 13:45:29 +02:00
Igor Filatov
b098399bbc elan: Support 0x0c01~0x0c33 2018-08-10 13:45:29 +02:00
Igor Filatov
65bbdff3fc elan: Stop doing sensor reset, change calibration and frame logic 
Sensor reset code has been removed because it is not needed during normal
operation.

Calibration and frame processing logic has been improved according to
recommendations from Elantech.
 2018-08-10 13:45:29 +02:00
Igor Filatov
fba3e682ea elan: Remove supported devices from udev whitelist 2018-08-09 14:45:15 +02:00
Igor Filatov
bccff4ffef elan: Change command structs, support more devices 
Make each command a separate struct to get finer control over which
commands are called on which devices. Update ssm's accordingly. Add
sensor_reset and fuse_load commands.

Support 0x0903, 0x0c03, 0x0c16, 0x0c1a, 0x0c26
 2018-08-09 14:42:25 +02:00
Bastien Nocera
9843c2d764 Merge branch 'wip/hadess/gtk-doc-meson-regression' into 'master' 
build: Fix build with newer meson

See merge request libfprint/libfprint!9
 2018-07-20 10:36:28 +00:00
Bastien Nocera
c9abbec48a build: Fix build with newer meson 
The gtk-doc meson helper regressed in that it didn't expect the
libfprint.types file to not exist, as earlier versions did. Remove
the --rebuild-types call so that it is not generated, and meson carries
on compiling the rest of the library.

See https://gitlab.gnome.org/GNOME/gtk-doc/issues/48
See https://github.com/mesonbuild/meson/issues/3892
See https://bugzilla.redhat.com/show_bug.cgi?id=1604585
 2018-07-20 12:22:50 +02:00
Bastien Nocera
bc79f9504b Merge branch 'wip/hadess/more-string-h' into 'master' 
lib: Include more standard headers for drivers to use

See merge request libfprint/libfprint!8
 2018-07-18 09:08:41 +00:00
Bastien Nocera
626b0f1a8f lib: Include more standard headers for drivers to use 
Such as string.h and stdlib.h, to be able to compile on older
toolchains like that of Fedora 27.
 2018-07-17 16:14:09 +02:00
Bastien Nocera
da95af0f48 0.8.2 2018-07-17 13:48:13 +02:00
Bastien Nocera
28b6f643d8 Merge branch 'wip/hadess/downgrade-assert-2' into 'master' 
Another assert downgrade

See merge request libfprint/libfprint!7
 2018-07-17 11:47:10 +00:00
Bastien Nocera
22277c7277 build: Downgrade meson in CI script 
It failed to finish the build otherwise:
https://github.com/mesonbuild/meson/issues/3892
 2018-07-17 13:43:00 +02:00
Bastien Nocera
19e7b217c1 lib: Downgrade fp_err() to be non-fatal 
Similarly to b1ac865abd, downgrade
fp_err() to be non-fatal. A number of drivers would spit out an error
when encountering this call, but not crash, carry on and most of the
time recover.

Make sure we don't assert in those cases.
 2018-07-16 16:08:54 +02:00
Bastien Nocera
29d3541b74 lib: Downgrade BUG* assertions to work-around crashes #2 
Same as b1ac865abd but for the drivers
API.
 2018-07-16 16:07:25 +02:00
Bastien Nocera
b9e5b3a55c Merge branch 'wip/hadess/downgrade-assert' into 'master' 
lib: Downgrade BUG* assertions to work-around crashes

Closes #77

See merge request libfprint/libfprint!6
 2018-07-03 09:44:56 +00:00
Bastien Nocera
b1ac865abd lib: Downgrade BUG* assertions to work-around crashes 
BUG() and BUG_ON() didn't use to assert, but only print an error if
debugging was enabled. This was hiding a lot of state bugs in drivers,
and transforming those into assertions causes crashes.

Downgrade the assertion to only print a warning, and hope that those
eventually get fixed in the drivers so we can re-enable them.

Closes: #77
 2018-07-03 11:40:25 +02:00
Bastien Nocera
21504c0621 Merge branch 'wip/hadess/poll-retval' into 'master' 
poll: Fix fp_get_pollfds retval type

See merge request libfprint/libfprint!5
 2018-06-26 13:18:40 +00:00
Bastien Nocera
056ea541dd poll: Fix fp_get_pollfds retval type 
fp_get_pollfds() is supposed to return a negative value on failure, but
size_t is an unsigned integer. Use ssize_t instead.
 2018-06-26 14:53:53 +02:00
Bastien Nocera
871fddf5fb Merge branch 'wip/hadess/more-upekts-statuses' into 'master' 
upekts: Fix enrollment never finishing on some upekts devices

See merge request libfprint/libfprint!3
 2018-06-20 17:16:08 +00:00
Bastien Nocera
c284858d06 upekts: Fix enrollment never finishing on some upekts devices 
Add support for more device status codes, brought back from the
now-removed UPEKE2 driver.

See 3bf55a3e07/libfprint/drivers/upeke2.c (L1013)
 2018-06-19 11:11:04 +02:00
Bastien Nocera
bb4d888661 elan: Fix typo in comment 2018-06-18 18:07:24 +02:00
Bastien Nocera
ff77cfc9b5 doc: Update more website links 2018-06-18 14:56:40 +02:00
Bastien Nocera
80f91ecb7b Merge branch 'master' into 'master' 
elan: Add USB ID for TNP Nano USB Fingerprint Reader (04f3:0c26)

See merge request libfprint/libfprint!1
 2018-06-13 20:09:47 +00:00
Corentin Noël
6cb77465ab elan: Add USB ID for TNP Nano USB Fingerprint Reader (04f3:0c26) 
The device works without any additional changes to the driver.

https://www.amazon.co.uk/gp/product/B075955HY7/
 2018-06-13 20:22:29 +01:00
Bastien Nocera
6f6127cbb6 0.8.1 2018-06-12 16:05:45 +02:00
Bastien Nocera
e1d85fb636 build: Install udev rules in correct directory 
The udevdir variable in udev.pc might not have a trailing slash.
 2018-06-12 16:03:34 +02:00
Bastien Nocera
74b5c92787 0.8.0 2018-06-12 15:42:22 +02:00
Bastien Nocera
ac1f97e2eb lib: Supported devices list is for master, not stable 2018-06-12 12:46:19 +02:00
Bastien Nocera
40f486b108 HACKING: Update hacking file 2018-06-12 11:06:26 +02:00
Bastien Nocera
b62e67401c lib: Fix supported devices page title again 
We need to call setlocale() so we run in UTF-8 mode, and can print that
sweet sweet em dash.
 2018-06-08 16:23:35 +02:00
Bastien Nocera
dd0a0134a6 lib: Fix supported devices page title 2018-06-07 17:46:08 +02:00
Bastien Nocera
5e24000799 build: Remove unused meson rule 
We're generating the supported-devices.md file in the website CI now.
 2018-06-07 17:39:36 +02:00
Bastien Nocera
c5cdfcb120 lib: Sort supported devices list 2018-06-07 17:39:04 +02:00
Bastien Nocera
549a6694d2 build: Disable supported-devices.md generation for now 
As added in e5393bf46a

It fails currently.
 2018-06-04 16:13:08 +02:00
Bastien Nocera
14e34e1d15 build: Remove ported Makefile.am snippet 2018-06-03 14:41:02 +02:00
Bastien Nocera
e5393bf46a lib: Add script to print MarkDown page of supported devices 2018-06-03 14:40:34 +02:00
Bastien Nocera
878a201bb1 README: Update links to new website 2018-06-03 00:31:05 +02:00
Bastien Nocera
b0e4619e0a docs: Update links to new website 2018-06-03 00:31:05 +02:00
Bastien Nocera
aec65777a7 nbis: Update links to new website 2018-06-03 00:30:10 +02:00
Bastien Nocera
31bad8ddd2 build: Fix fprint.h install destination 
Since the port to meson, fprint.h was installing to $includedir instead
of $includedir/libfprint/
 2018-05-31 14:35:16 +02:00
Bastien Nocera
79d65c907f build: Add missing X11 deps for the examples 2018-05-31 12:30:48 +02:00
Bastien Nocera
92231d984f build: Add some missing build essentials 2018-05-31 12:23:30 +02:00