Commit graph

1240 commits

Author SHA1 Message Date
Marco Trevisan (Treviño)
6ca8441df9 umockdev-tests: Don't fail when trying to save other errors 2020-12-09 10:26:58 +01:00
Marco Trevisan (Treviño)
8112da0358 umockdev-tests: Still raise an error when storing the exception output
Otherwise we won't ever fail
2020-12-09 10:26:58 +01:00
Marco Trevisan (Treviño)
f2ea3e784e fp-print: Delete not-defined anymore functions 2020-12-09 10:26:58 +01:00
Benjamin Berg
74810a8472 image: Fix warning about uninitialized variable
The variable is only initialized later in the function. This is
harmless, as there is no return, but it causes a warning due to the
automatic free.
2020-12-08 13:33:30 +01:00
Benjamin Berg
91fb8d8cb4 compat: Add GFlagsClass autopointer
It was added to GLib at the same time as GEnumClass. We did not list it
though and are now using it in a test.
2020-12-08 13:27:50 +01:00
Marco Trevisan (Treviño)
0688288c6d .git-blame-ignore-revs: Ignore formatting commit and add hint how to use it 2020-12-07 19:01:10 +01:00
Marco Trevisan (Treviño)
c1e832e7a7 fp-device: Return valid finger status value on error
Not that the two enums have different value, but indeed the type is
wrong.
2020-12-04 12:15:22 +00:00
Marco Trevisan (Treviño)
b5496fd257 fp-device: Ensure finger status is set to proper type on property getter
Finger status is a flag not an enum.

Add tests.
2020-12-04 12:15:22 +00:00
Marco Trevisan (Treviño)
de271a0e8d fp-print: Don't byte-swap two times the NBIS array contents
When serializing an image print in big endian machine we ended up
swapping the arrays contents two times, first when adding the values and
eventually when calling g_variant_byteswap which already handles this
properly.

With this, we get the test passing into s390x.

Fixes: #236
2020-12-02 16:40:10 +00:00
Marco Trevisan (Treviño)
12b0120a3d test-fpi-device: Always check the return values for the API calls
Ensure that the return value of the API calls match the expected one,
as we need to ensure that it also matches with the error/no-error case.
2020-12-02 16:28:36 +00:00
Marco Trevisan (Treviño)
2783ac3e60 fpi-device: Return proper type on identification success
Identify function is supposed to propagate a boolean value, but we make
it return an integer instead on idle, this can be normally the same in
most of architectures, but not in BE ones.

So, make it return the proper type.
Fixes test failures in s390x.

Related to #236
2020-12-02 16:28:36 +00:00
Aris Lin
abb0b1267c synaptics: add support PID 0xE7 2020-12-02 10:21:39 +08:00
Benjamin Berg
5cb91a4189 Release 1.90.5 2020-12-01 10:14:26 +01:00
Benjamin Berg
0bb132b167 NEWS: Fix release date of 1.90.4 2020-12-01 10:14:02 +01:00
Benjamin Berg
ce39f27b5e vfs301_proto: Remove usless break after return
Closes: #341
2020-11-30 20:22:18 +00:00
Benjamin Berg
7d0956513b upekts: Remove duplicated err handling path
Closes: #342
2020-11-30 20:22:17 +00:00
Marco Trevisan (Treviño)
2b7cfa751a list-udev-rules: Remove Wrongly added well-known USB controller vid/pid combo
This was causing USB controllers to use power-saving mode, breaking usb
devices usage.

Related to: https://gitlab.freedesktop.org/libfprint/libfprint/-/issues/327
2020-11-30 20:03:32 +01:00
Vincent Huang
0eee6a56dd synaptics: add support to sensor PID 0xC9 2020-11-30 13:53:07 +08:00
Benjamin Berg
8962e14fde Release 1.90.4 2020-11-27 13:55:49 +01:00
tt83
e246e00ba3 elan: added 0c4d device to the array of supported devices 2020-11-26 12:39:19 +01:00
Marco Trevisan (Treviño)
fa3bdb874d udev-rules: Regenerate from wiki to include VFS495 2020-11-25 18:28:41 +01:00
Benjamin Berg
2caeb8cbb3 udev-rules: Add unsupported devices from wiki page to rules
This ensures we are putting all these devices (which are unusable) into
power save mode.
2020-11-25 14:56:06 +00:00
Marco Trevisan (Treviño)
dda3587b76 identify: Use stored print to show identify information
The stored print may contain more metadata, so let's use that for
device-stored print, if available.
2020-11-23 17:00:01 +00:00
Marco Trevisan (Treviño)
fb5854213a examples: Add Identify example
It was the only main action left in the examples, we use the gallery
from the device if available, otherwise the local one.
2020-11-23 17:00:01 +00:00
Benjamin Berg
21ee241f0c virtual-image: Add command to trigger device removal
This is primarily useful for fprintd testing.
2020-11-23 17:47:03 +01:00
Benjamin Berg
280f916ace image-device: Fix incorrect g_free of error
GError needs to be free'ed using g_error_free, fix this.
2020-11-23 17:47:03 +01:00
Benjamin Berg
1b5dd0057f tests: Add device removal test
This tests all relevant scenarios of device removal, i.e.:
 * device is not open
 * device is currently closing
 * device is open and idle
 * device is currently opening
 * device is open and active

The test ensures that in all scenarios the following holds true:
 * device "removed" signal is only emitted after the action completes
 * context "device-removed" signal is only emitted after the device has
   been closed

Note that the "opening" case is special. Here we confirm that a success
from "open" will not be overriden by a FP_DEVICE_ERROR_REMOVED error, in
order to correctly signal that the internal device state is open and it
needs to be closed.
2020-11-23 17:47:03 +01:00
Benjamin Berg
8a6f1932f8 virtual-image: Add a notify::removed handler
In general, we rely on the underlying transport layer to throw errors
which will abort the current operation. This does not work for the
virtual image device though, but we need it there for testing purposes.

Add a notify::removed handler that makes things work as expected. Let it
throw a protocol error which should not be visible to the outside.
2020-11-23 17:47:03 +01:00
Benjamin Berg
0051ff6352 device: Treat devices as closed even after a close failure
We require the close call, but as the underlying transport layer is
gone, it will generally just return an error.

In principle, it makes sense to think of close as a function that always
succeeds (i.e. it makes no sense to try again). Should the device be in
a bad state, then a subsequent open() will simply fail.
2020-11-23 17:47:03 +01:00
Benjamin Berg
b6dd522459 Rework device removal to have a nice API
This enhances the device removal to create a well defined behaviour.

Primarily, it means that:
 * "device-removed" will only be called for closed devices
 * "removed" will be called only when no operation is active

Note that all actions will fail with FP_DEVICE_ERROR_REMOVED, *except*
for open which will only return this error if it failed.

Resolves: #330
2020-11-23 17:47:03 +01:00
Benjamin Berg
656bf3d175 elan: Add a few comments that stopping/callibrating helps
Apparently stopping/callibrating helps with the reliability of these
sensors. Add a few comments so that this information is known.

See https://gitlab.freedesktop.org/libfprint/libfprint/-/issues/216#note_619467
2020-11-18 15:18:11 +01:00
Benjamin Berg
fe498c56c7 virtual-image: Fix race condition closing new connection
When a new connection came in we would close the old connection. This in
turn would trigger a receive error causing the *new* connection to be
closed from the error handler.

Fix this by simply cancelling any pending transfers when a new
connection comes in. Also change the error handling code to catch issues
like partial writes correctly.

This fixes an issue for the fprintd test where some tests were flaky.
2020-11-10 15:59:53 +01:00
Marco Trevisan (Treviño)
251ccef9ba fpi-device: Add debug information about the enrolled finger 2020-11-08 22:19:23 +01:00
Marco Trevisan (Treviño)
3b993fabb6 verify/enroll: Save and use locally saved prints also for devices with storage
Some devices have storage but that's is limited enough not to be able
to store all the metadata, but just a fingerprint id.

In such case we also need to use the local storage to be able to verify.
Fprintd does this already, but we don't do it in the libfprint examples.

So, in in case we enroll, always save the print information to the disk,
while in case we verify we try to load the print from disk and we use
that in case its private data matches the one provided by the device.
2020-11-08 22:19:23 +01:00
Marco Trevisan (Treviño)
0c56e0de6d synaptics: Report finger status to libfprint
The inactivation in case would be set back by libfprint
2020-11-07 13:23:30 +00:00
Marco Trevisan (Treviño)
893ff9c033 fp-image-device: Report finger status changes to the device
While the image device has its own finger status tracking, we use a simpler
version as public data information, so let's just report the finger-on/off
and when a finger is expected to the parent class.

Verify that this happens as expected using the virtual-image class
2020-11-07 13:23:30 +00:00
Marco Trevisan (Treviño)
3c382cac7f fp-device: Reset the finger status on complete
Devices should handle the finger status internally, but if they don't do it
we need to handle it on actions completion
2020-11-07 13:23:30 +00:00
Marco Trevisan (Treviño)
42e4506b1b fp-device: Add finger-status property
It can be used by drivers to report the state of the finger on sensor
2020-11-07 13:23:30 +00:00
Benjamin Berg
ae3baadcf9 tests: Add a new test for vfs301
See: #320
2020-11-05 15:55:09 +01:00
Benjamin Berg
4f29a32da8 tests: Store temporary directory on failure
It is not very useful to just delete the data again after a failure, as
it might be useful for debugging. Just store it into an "errors"
subdirectory of the PWD in the hope that this is a sane location.

Note that it'll error out if the directory already exists, but that
should be acceptable in all cases. i.e. it won't exist in the CI and
developers can just wipe the directory.
2020-11-05 15:52:54 +01:00
Benjamin Berg
e5fa54e8e7 vfs301: Start capture only on state change to AWAIT_FINGER_ON
Start the capture when the state changes to AWAIT_FINGER_ON instead of
assuming that the device should always be active.

Closes: #320
2020-11-04 14:13:00 +01:00
Benjamin Berg
d3076039d0 vfs301: Fix device pointer handling in callback
When porting the driver to the new libfprint 1.90.0 a mistake was made
where the device was not passed through user_data anymore but it was
still read from there. Stop using user_data in the callback to fix this.

See: #320
2020-11-04 14:13:00 +01:00
Benjamin Berg
a748f4d30f elan: Simplify elan driver internal state machine
The elan driver always "deactivates" the device after a cpature run. We
can simplify the while internal state into a single "active" state and
rely on the image device driving this state machine correctly.

i.e.:
 * We start a callibrate/capture/deactivate when we go into the
   AWAIT_FINGER_ON state
 * We only store the fact that we are active and want to deactivate
 * We rely on the image device never going into the AWAIT_FINGER_ON
   state without first waiting for the finger to be off (which implies
   deactivation).
2020-11-04 14:13:00 +01:00
Benjamin Berg
3ee5536a13 image-device: Redefine internal states and valid transitions
This adds a number of new internal states to better capture what is
going on. Also added are checks that all transitions we make are in the
set of expected and valid transitions.

Only three drivers use the state_change notification. These drivers are
updated accordingly.
2020-11-04 14:13:00 +01:00
Benjamin Berg
f56aacc7ef image-device: Remove cancelling boolean from private data
The boolean is just used to emit a warning for unexpected state
transitions. It is sufficient to pass it to the deactivate function
directly for that purpose.
2020-11-04 14:13:00 +01:00
Benjamin Berg
96fa0a96eb uru4000: Fix missing reference to image transfer
We might redo image transfers, but we only ever had one reference that
was implicitly removed after the transfer completed. Add a new reference
each time it is submitted and only free the last reference in the stop
handler.
2020-10-19 17:41:26 +02:00
Benjamin Berg
1754bd0204 synaptics: Always submit interrupt transfer without a timeout
For some reason we re-submitted the interrupt transfer with a timeout of
1s while the original submission was without a timeout. This looks like
typo, remove the timeout.
2020-10-19 17:14:24 +02:00
Benjamin Berg
90a1abf2f8 synaptics: Fix missing reference to interrupt transfer
When resubmitting the interrupt transfer we need to add a new reference
as the submit function will steal it again.
2020-10-19 17:13:58 +02:00
Benjamin Berg
59824d2122 synaptics: Remove useless code
There is never a fall through if error is not NULL.
2020-10-19 16:59:07 +02:00
Vincent Huang
31319d9c6f synaptics: add support to pid 0xF9, 0xFC, 0xC2 2020-10-15 12:25:34 +08:00