We only allow suspending while we are in the interrupt transfer stage.
To suspend, we cancel the interrupt transfer and at resume time we
restart it.
This has been tested to work correctly on an X1 Carbon 8th Gen with
suspend mode set to "Windows 10" (i.e. S0ix [s2idle] and not S3 [suspend
to RAM]). With S3 suspend, the USB root hub appears to be turned off or
reset and the device will be unresponsive afterwards (if it returns). To
avoid issues, libfprint disables the "persist" mode in the kernel and
we'll see a new device instead after resume.
The assumption here is that in most cases, we will just cancel any
ongoing operation. However, if the device choses to implement
suspend/resume handling and it returns success, then operations will not
be cancelled.
Note that suspend/resume requests cannot be cancelled.
Closes: #256
Check if a device is too hot. If it is too hot already, refuse
operation. If it becomes too hot while an operation is ongoing, then
cancel the action and force a FP_DEVICE_ERROR_TOO_HOT return value.
Devices that are considered to never run hot will have FEATURE_ALWAYS_ON
set. If set, the UI can safely assume that it is fine to run fingerprint
authentication in the background without other user interaction.
Closes: #346
This will allow libfprint to cancel operations internally in the future.
If the internal cancellation method is used, then the private
current_cancellation_reason variable must be set to the GError. This
error will be returned when set.
This temperature model has three states:
* COLD
* WARM
* HOT
Device drivers can define the time it requires for the device to get HOT
and COLD. The underlying model assumes an exponential warming and
cooling process and enforces a cool-off time after the device has
reached the HOT state. This cool down period is however shorter than the
specified time in the driver.
The timeout is designed to continue commands automatically that are
common (e.g. opening the device). This doesn't really make sense for
scan commands, and removing the timeout enables test setups where user
interaction with the device may happen at arbitrary times.
One exception is device removal/unplug, in which case the timeout will
be added anyway.
Such an empty identify can be run by fprintd intentionally for duplicate
checking at the start of an enroll operation, which currently runs into
an error from the driver.
Avoid this by simply returning success immediately. This is fine, as
synaptics is only checking the explicitly passed list of prints rather
than using all available prints from the storage.
Simply remove the feature flag for the NO_LIST environment variable.
This also removes the IDENT variant for now as it has never been
implemented as described.
During startup, we'd always get:
(fprintd:151125): libfprint-uru4000-WARNING **: 12:16:56.724: ignoring unexpected interrupt 56aa
But we actually know what this interrupt is, and it's not unexpected, as
it tells us that the reader is now powered on.
If the tile in question was hanging over the left edge we would not be
copying the full available width. Fix this and change the test to catch
the error condition (by forcing a too small image and overlap both
ways).
Simplify the code by only selecting the starting point inside the
image/frame and then just checking the both image and frame boundary in
the loop. Not quite as efficient, but it really shouldn't matter too
much here.
Long transfers need to be split into multiple chunks because of
limitations by the spidev kernel driver. If this happens, we need to
make sure that the CS line remains high between the different chunks.
Add code to split the transfer into chunks and ask the driver to not
deassert CS after the transfer. Technically, this is only an
optimization as concurrent access to another device might still cause
deselection. However, this should mean that devices work without having
to change the spidev module parameter.
Use the feature in the hope that it will work. However, print a message
(not a warning), to help with debugging in case someone does run into
issues because of this.
Previously, we checked hidraw devices against drivers by using the
HIDIOCGRAWINFO ioctl. While this works, it's not ideal for doing unit
tests since umockdev would have to implement hidraw ioctls.
The new approach uses the HID_ID property on the parent hid device,
which contains the VID/PID pair.
The driver has an internal cancellable that simply forwards the external
cancellation in the cancel callback. This is not really needed, we can
instead just use the external cancellable directly by fetching it using
fpi_device_get_cancellable().
The (trivial) CRC code was copied from gstreamer. However, the license
stated here was LGPLv2 rather than LGPLv2.1+. Identical code can currently
be found upstream in gstreamer licensed under LGPLv2+. As such, update
the license, making it more compatible with the rest of libfprint.
Also add the "or any later version" to upekts.c. The library was already
LGPL2.1+ at the time and libthinkfinger authors approved a license
change.
